End Mills

Catalog

Solid carbide end mills, stocked in Canada. Square, corner radius (bull nose), ball nose and chamfer mills in inch sizes from 1/8" to 1/2" — prices and stock are on every product page, and you can order without asking for a quote.

Square and corner radius end mills do most of the work here — flat bottoms, shoulders and general milling, with the radius version holding up longer in steel and stainless. Ball nose for 3D contouring and finishing. Chamfer mills for deburring and lead-ins.

Two brands — U.P. TOOL and our own EASYCUT. Two to five flute, AlCrN, AlTiN and TiCN coatings or uncoated for aluminum, corner radii from R0.010" to R0.030", and extended-neck versions when you need reach past the shank.

Total found: 489

Only new

Only in stock

Only special price

3/4" Carbide End Mill, 4 flutes, Bull Nose - R0.03", 1.5" LOC, AlCrN Coated

80137764Running out of stock

CA$164.25

excl. taxes

1" Carbide Square End Mill, 2 flutes, 1.0" LOC, Uncoated

80137797Running out of stock

CA$195.09

excl. taxes

1" Carbide Square End Mill, 4 flutes, 2.0" LOC, AlCrN Coated

80137782Running out of stock

CA$203.97

excl. taxes

1 inch Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, LOC 2.000

80137749Running out of stock

CA$225.46

excl. taxes

1" Carbide End Mill, 4 flutes, Bull Nose - R0.015", 2.0" LOC, AlCrN Coated

80137765Running out of stock

CA$261.58

excl. taxes

1" Carbide End Mill, 4 flutes, Bull Nose - R0.03", 2.0" LOC, AlCrN Coated

80137766Running out of stock

CA$261.58

excl. taxes

3/16" Carbide Ball Nose End Mill, 2 flutes, 0.5" LOC, AlCrN Coated

80137742Running out of stock

CA$10.60

excl. taxes

1 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, LOC 3 mm

80151787Running out of stock

CA$11.15

excl. taxes

2 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, LOC 6 mm

80151788Running out of stock

CA$11.15

excl. taxes

1 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, LOC 2 mm

80151789Running out of stock

CA$12.01

excl. taxes

2 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, LOC 4 mm

80151790Running out of stock

CA$12.01

excl. taxes

1/4 Carbide Ball End Mill, 4 flute, Hybrid AlCrN Coated, 0.25 shank x 0.75 LOC, helix angle 35/37

A06-2063Running out of stock

CA$23.44

excl. taxes

3/8" Carbide Square End Mill, 4 flutes, 1.125" LOC, AlCrN Coated

80137778Running out of stock

CA$29.55

excl. taxes

3/8" Carbide Ball Nose End Mill, 2 flutes, 1.125" LOC, AlCrN Coated

80137745Running out of stock

CA$32.54

excl. taxes

3/8" Carbide End Mill, 4 flutes, Bull Nose - R0.015", 1.125" LOC, AlCrN Coated

80137758Running out of stock

CA$35.31

excl. taxes

3/8 Carbide end mill, 5 flute, TiAlN, 0.375 shank x 1.0 LOC, helix angle 38

A01-5095Running out of stock

CA$35.62

excl. taxes

4 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, LOC 12 mm

80147224Made to order

CA$11.15

excl. taxes

3 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, LOC 6 mm

80151791Made to order

CA$12.01

excl. taxes

1/4" Carbide Square End Mill, 4 flutes, 0.75" LOC, AlCrN Coated

80137776Out of stock

CA$15.25

excl. taxes

3mm Carbide End Mill, 4 Flutes, Bull Nose - R0.5mm, 8mm LOC, AlCrN Coated

80164259Made to order

CA$16.65

excl. taxes

6 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, LOC 16 mm

80147218Made to order

CA$21.46

excl. taxes

6 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, LOC 12 mm

80147227Made to order

CA$21.94

excl. taxes

6 mm Carbide End Mill, 4 Flutes, 0.1 mm Corner Chamfer, Standard length, For P, M, K materials, AlCrN coated, LOC 16 mm

80147216Made to order

CA$22.38

excl. taxes

6mm Carbide Drill Mill, 2 flutes, 90°, 25mm LOC, Uncoated

2CEN90-060250-6-SPMade to order

CA$24.58

excl. taxes

Carbide End Mills - Types, Benefits, and Tips

End mills do most of the metal removal in a milling shop, and the type you pick changes surface finish, tool life and cycle time. Flat (square), ball nose, corner radius and chamfer each have a job they are good at. This page covers what the differences mean in practice and what we stock.

Key Takeaways

Square end mills - flat bottoms, shoulders and slots, general milling in most alloys.
Corner radius (bull nose) end mills - the same work as a square end mill, but the radius takes load off the corner, so the tool survives longer in steel and stainless.
Ball nose end mills - 3D contouring, profiling and finishing curved surfaces.
Chamfer end mills - deburring, edge breaks and lead-ins before welding or assembly.

Types of Carbide End Mills

The profile you choose has a direct effect on surface quality, tool life and how hard you can push the cut. Below are the four types we stock and where each one belongs.

Square End Mills

Square (flat) end mills cut a flat bottom and a true 90 degree corner. They are the default choice for slotting, side milling and general work, and they run in everything from aluminum to hardened steel.

Flute count and shank diameter matter more here than most people expect. More flutes give a better finish and let you push feed, but leave less room for chips - which is why aluminum wants fewer flutes and steel tolerates more. A larger shank relative to the cut adds rigidity and reduces chatter on deeper passes.

Corner Radius (Bull Nose) End Mills

A corner radius end mill is a square end mill with the sharp corner replaced by a small radius, typically R0.010" to R0.030". That corner is where a square end mill usually fails first, so moving load off it is the cheapest way to extend tool life in steel, stainless and heat-treated material.

The trade-off is the radius it leaves in the corner of your pocket or shoulder. If the print allows it, a corner radius tool will outlast a square one doing the same job. If you need a sharp internal corner, use square.

Ball Nose End Mills

Ball nose end mills have a full radius tip for contoured and 3D surfaces - mould and die work, sculpted geometry, finishing passes. Cutting pressure stays consistent as the tool follows a curve, which is what gives the surface finish. Note that cutting speed drops to zero at the very tip, so a small step-over and a tilted tool axis, where the machine allows it, both help.

End Mills

Carbide End Mills - Types, Benefits, and Tips

Key Takeaways

Types of Carbide End Mills

Square End Mills

Corner Radius (Bull Nose) End Mills

Ball Nose End Mills

Carbide End Mills - Types, Benefits, and Tips

Key Takeaways

Types of Carbide End Mills

Square End Mills

Corner Radius (Bull Nose) End Mills

Ball Nose End Mills

Chamfer End Mills

Benefits of Carbide End Mills

Usage Tips for Carbide End Mills

Choosing the Right End Mill

Buying End Mills from CNCmarket

Frequently Asked Questions